FTESOLAR lighting
设为首页 | 加入收藏
 
最新文章
列管式UHT的热回收率的探讨

刘波

(江苏新美星包装机械股份有限公司,江苏苏州215600)

摘要:在列管式UHT 的应用中,热回收率的提高具有很大的意义,在减少蒸汽消耗量的同时,还可以减少用于将热回收后的产品冷却到灌装温度时所需要的冷却水的消耗。通过在不同的热水流量下,对热回收率与换热面积的关系进行比较发现,可通过降低热水流量,增加换热面积来提高热回收率。当热回收率的提高一定程度后,再提高时所需要的换热面积会显著增加,因此,确定合适的热回收率,使设备的制造成本和生产成本控制在合理的范围内,是很重要的。

关键词:热回收率;热水流量;换热面积;对数平均温差

Discussion on Heat Recovery Rate of Tubular UHT

LIU Bo

(Newamstar Packaging Machinery Co.,Ltd,Suzhou 215600,China)

Abstract: Improving heat recove ry rate is highly meaningful for applications of tubular UHT,because at the time ofdecreased steam consumption,the cooling water consumption can also be decreased which is required for cooling theproduct after heat recycling process to the filling temperature. Comparing heat recovery rate and heat exchange area underthe different hot water flow,it can be found out that heat recovery rate is achieved by reducing flow of hot water and addingheat exchange area. As the heat recovery rate increases to a certain extent,further increasing of heat recovery efficiencywill require much more area. Therefore,determining suitable heat exchange area,to control the equipment manufacturingcost and production cost in a reasonable range,is very important.

Key words: heat recovery rate;the flow of hot water;heat exchange area;logarithmic mean temperature difference

(2018年第21卷第3期)

版权所有:中国饮料工业协会 电话:010-84464668
邮箱:ylgy@chinabeverage.org 传真:010-84464236 邮编:100027 地址:北京市朝阳区东三环北路丙二号天元港中心B座1702室
OEM:201107272203261305