《饮料工业》杂志
设为首页 | 加入收藏
 
最新文章
降膜式蒸发器循环泵流量如何确定

刘殿宇
(华禹乳品机械制造有限公司,黑龙江安达151400)

摘要:降膜式蒸发器降膜管周边润湿量不足,就需考虑分程增大周边润湿量,而分程需设置循环泵。因循环泵的流量选择不合理造成泵机封烧毁现象时有发生,本文就此仅以RNJM03-5200 型三效降膜式蒸发器在奶粉生产中的应用为例加以阐述。

关键词:降膜式蒸发器;周边润湿量;循环泵;流量


Determination of Circulating Pump Flow Rate of Falling Film Evaporator
LIU Dian-yu
(Hua Yu Dairy Machinery Manufacturing Co.,Ltd.,Anda 151400,China)

Abstract: If the wetting amount of falling film evaporator is not enough,it is necessary to consider increasing the wetting amount of falling film tube. The circulation pump is needed to be set up in the separation process. The burning phenomenon of the pump seal is often caused by the unreasonable flow rate selection of the circulation pump. In this regard,the application of RNJM03-5200 type three-effect falling-film evaporator in the milk powder production is only illustrated by taking the application of RNJM03-5200 type three- effect falling-film evaporator in the milk powder production as an example.

Key words: falling film evaporator;ambient wettability;circulating pump;traffic

(2020年 第23卷 第3期)

版权所有:中国饮料工业协会 电话:010-84464668
邮箱:ylgy@chinabeverage.org 传真:010-84464236 邮编:100027 地址:北京市朝阳区东三环北路丙二号天元港中心B座1702室
OEM:201107272203261305