《饮料工业》杂志
设为首页 | 加入收藏
 
最新文章
紫苏籽油微胶囊喷雾造粒工艺及稳定性研究

朱小勇1,李建东2,潘映霞2,王南露1

(1 新昌新和成维生素有限公司,浙江  新昌  312532;

2 浙江新和成股份有限公司,浙江  新昌  312532)

摘要:采用喷雾造粒技术,以紫苏籽油为芯材,吐温-80 和司盘-80 为复配乳化剂,固体玉米糖浆为填充剂,测定乳化液粘度、粒径和紫苏籽油微胶囊包埋率,探究不同壁材、固形物含量、蠕动泵转速对制备紫苏籽油微胶囊的影响。结果表明:以酪蛋白酸钠为壁材,质量分数7.5%,芯壁比3∶1,以固体玉米糖浆为填充剂,质量分数30%,造粒转速1200r/min 时得到的紫苏籽油微胶囊包埋率最高为97.85%。并对此产品稳定性进行了研究,结果表明微胶囊产品具有良好的稳定性。

关键词:紫苏籽油;造粒;包埋率;稳定性

The Research of Spray Granulation Technolgy and Stability of Perilla Seed Oil Microcapsules

ZHU Xiao-yong1,LI Jian-dong2,PAN Ying-xia2,WANG Nan-lu1

(1 Xinchang NHU Vitamins Company Ltd.,Xinchang 312532,China;

2 Zhejiang NHU Company Ltd.,Xinchang 312532,China)

Abstract: The perilla seed oil microcapsules was prepared by spray granulation,using the perilla seed oil as the corematerial,Tween-80 and Span-80 as compound emulsifiers and solid corn syrup as fillers,to determine the emulsionviscosity,particle size and the embedding rate of perilla seed oil microcapsules and explore the effects of differentwall materials,solid content and peristaltic pump speed on the preparation of perilla seed oil microcapsules. Theresults show when used the sodium caseinate as wall material,mass fraction 7.5%,the core- to- wall ratio of 3:1,solid corn syrup as fillers,mass fraction 30% ,and the granulation speed of 1200r/min can get the highestmicrocapsule embedding rate is 97.85%. And the stability of this product has been studied,and the results show thatthe product has good stability.

Key words: perilla seed oil;granulation;embedding rate;stability

中图分类号:TS202.1        文献标志码:A       文章编号:1007-7871(2021)04-0047-04

2021,Vol.24,No.4

版权所有:中国饮料工业协会 电话:010-84464668
邮箱:ylgy@chinabeverage.org 传真:010-84464236 邮编:100027 地址:北京市朝阳区东三环北路丙二号天元港中心B座1702室
OEM:201107272203261305